Piece to piece

Monti Antonio P02

P02

Applications

Overview

Specification

Applications We Power

Fashion & Lifestyle

Home Furnishing

Soft Signage

Sportswear

Print Applications

Baby Garments

Socks

Tagless Neck Label

Swimming Cap

Pneumatic Single Press for Transfer Printing And Laminating

The Monti Antonio P02 is a robust pneumatic single press engineered for high-quality transfer printing and laminating applications. Its design is centered on providing reliable, consistent pressure and temperature, making it a highly effective and foundational piece of equipment for single-table operations in the textile and graphics industry.
‍
PLANES DIMENSION : 1170 x 750 mm - 46,06 x 29,53 inch

4 Kyocera Printheads

Fabric & Paper in One Printer

Up to 6 Color Channels (Supports Fluorescent and Light Colors)

Mesh Printing Capability

Limited Coverage of 3 Years Warranty

Mobile Monitoring (Allows remote status check)

DOWNLOAD PDF

250

PRINTS PER HOUR

1

OPERATOR REQUIRED

CMYK + OG

Color Channels

2

In-Line PreTreat Stations for Light & Dark

36

Printheads

Technical specifications

Configuration

VORTEX GAS
48/10

VORTEX GAS
48/14

VORTEX GAS
48/18

VORTEX GAS
48/22

Belt Width

122.0 cm (48")

Burner Input Maximum

320000 Btu

Gas Input Size

19.5 mm (3/4")

Average Gas (LPG) Consumption¹

1.8 kg/hr

2.2 kg/hr

Rated Electrical Requirements^2,3

208-230 V, 3ph, 14.5 A, 60 Hz, 4.7 kW380-415 V, 3ph, 8.5 A, 50 Hz, 4.7 kW

Specifications

DGI FT 3204X

Print Speed (4 heads)

155m/hr (1,668ft), 95m/hr (1,022ft), 50m/hr (538ft), 35m/hr (377ft)

Print Resolution (4 heads)

600 x 600dpi (2Pass), 600 x 600dpi (4Pass), 600 x 1,200dpi (8Pass), 600 x 1,800dpi (12Pass)

Print Speed (2-3 heads)

85m/hr (914ft), 60m/hr (645ft), 45m/hr (484ft)

Print Resolution (2-3 heads)

600 x 600dpi (4Pass), 600 x 900dpi (6Pass), 600 x 1,200dpi (8Pass)

Max Print Width

3,200mm / 126 inch

Max Media Load

3,220mm / 300mm / 100kg (127 inch / 12 inch / 220lb)

Print Mode

Bi-Direction / Uni-Direction, Normal / Interleave

Printhead

TCP / IP, USB 3.0

Color

4 Colors (K, C, M, Y) / 6 Colors (Fy, Fp / Lm, Lc)

Ink

DGI original water-based Dye Sublimation Ink

Interface

TCP / IP, USB 3.0

Environmental Range

Temperature: 20~30°C (68~86°F), Humidity: 40~70% .Environment condition may affect on final printing quality.

Electricity Requirements

Single phase, 200-240V, 50/60 Hz, 35A (Printer: 5A, Dryer: 30A)

*All specifications are subject to change without prior notice

DOWNLOAD PDF

Copperhead Consumables

Achieve vibrant, durable, and high quality results

Pure Water Base Ink

Oval Printers